Energy efficiency
This fact sheet explains the EU’s energy efficiency policy, including its legal framework, primary targets and most important laws. The policy aims to reduce greenhouse gas emissions, lower energy bills and improve energy security while reducing dependence on imported fossil fuels. The fact sheet highlights the European Parliament’s role in shaping this policy.
Legal basis
- Article 194 of the Treaty on the Functioning of the European Union establishes energy policy as an area of ‘shared competence’ between the EU and its member countries. This means that EU countries can make laws and adopt legally binding measures if the EU has not done so. The article promotes energy efficiency and energy savings, in the context of the EU single market and the need for environmental protection.
- A reduction of 11.7% in the EU’s final energy consumption, capped at 763 Mtoe (binding), with implications for primary energy consumption, capped at 992.5 Mtoe (indicative);
- A reduction of 1.9% in the public sector’s annual energy consumption.
- Renovate annually at least 3% of public buildings bigger than 250m2;
- Achieve annual savings in final energy consumption of 1.5% in 2026 and 2027, rising to 1.9% in 2028, 2029 and 2030;
- Data centres to report on their energy efficiency;
- EU countries to set up dedicated one-stop shops to provide advice and assistance on energy efficiency to small and medium-sized enterprises, households and public bodies;
- Municipalities with over 45 000 inhabitants to prepare heating and cooling plans.
- Define minimum energy performance requirements for buildings and buildings elements;
- Adopt a methodology for calculating the energy performance of buildings.
- All new public buildings are zero-emission buildings from 2028;
- All new buildings are zero-emission buildings from 2030;
- New large buildings have the global warming potential of their entire life cycle calculated from 2026;
- All new buildings have their life cycle global warming potential calculated from 2030.
- Set minimum energy performance standards for their non-residential building stock that will trigger the renovation of the 16% and 26% worst-performing buildings in the stock by 2030 and 2033 respectively;
- Establish a trajectory to progressively decrease the average primary energy use of their residential building stock by 16% by 2030, and by 20-22% by 2035, compared to 2020, focusing on their worst-performing buildings.
- An overview of the national building stock for different building types;
- A roadmap with nationally established targets for 2030, 2040 and 2050;
- An overview of planned policies and measures; and
- An outline of the investment needs and financing sources for its implementation.
- Conduct a cost-benefit analysis of the potential of using cogeneration when they plan to build or refurbish a heat, electrical or industrial installation, or a district heating and cooling network, of more than 20 MW of heat;
- For already existing facilities, assess the potential for efficient heating and cooling, including cogeneration, when requested.
- Improving product durability, reusability, upgradability and reparability;
- Enhancing the possibility of product maintenance and refurbishment;
- Making products more energy and resource-efficient;
- Addressing the presence of substances that prevent products from being reused or recycled;
- Increasing recycled content;
- Making products easier to remanufacture and recycle;
- Setting rules on carbon and environmental footprints;
- Limiting the generation of waste;
- Improving the availability of information on product sustainability.
Objectives of EU energy efficiency policy
The EU’s energy efficiency policy sets reduction targets for the EU’s energy consumption by 2030, compared to projections made in 2020.
Targets are expressed in primary energy consumption, which measures the total energy demand of a country, and final energy consumption, which refers to the total energy consumed by the end users (households, industry, etc.). Both are measured in million tonnes of oil equivalent (Mtoe).
Key energy efficiency obligations include:
EU countries must also:
Achievements of EU energy efficiency policy
A. The Energy Efficiency Directive
The Energy Efficiency Directive, adopted in 2023, is the cornerstone of the EU’s energy efficiency policy. It sets the EU’s energy efficiency target and requires EU countries to set indicative national energy efficiency targets, based on final energy consumption contributions, to meet the EU’s target.
The directive introduces the obligation for the public sector to play an exemplary role: it sets targets for final energy consumption and for renovations to achieve energy efficiency. It revises the definition of efficient district heating systems and sets new requirements aimed at fully decarbonising the energy supply for these systems by 2050.
The directive establishes the ‘energy efficiency first’ principle, which states that efficiency solutions should be considered as the first option in policy, planning and investment decisions.
It also extends energy audit obligations to all companies exceeding a certain energy threshold and it requires large industrial consumers to implement energy management systems. It strengthens competence requirements for energy efficiency professionals and mandates EU countries to report on energy efficiency investment. It also provides project development support at various levels to help achieve the EU’s energy efficiency targets.
Finally, the directive makes it obligatory for:
It also includes consumer protection provisions, defines energy poverty at EU level and introduces measures for its reduction.
B. Energy performance of buildings
1. The Energy Performance of Buildings Directive
The EU’s approach to building sustainability is primarily governed by the 2024 Energy Performance of Buildings Directive, which sets out the requirement to transform the EU’s existing building stock into a zero-emission building stock by 2050.
a. Minimum energy performance requirements
EU countries must:
b. Energy performance standards for new buildings
A zero-emission building must meet high energy performance standards, not produce any on-site emissions from fossil fuels, and have zero or a very low amount of greenhouse gas emissions.
EU countries must ensure that:
c. Energy performance standards for existing building stock
EU countries must:
Specific exceptions apply to religious, small, low-energy or temporary buildings.
The Energy Performance of Buildings Directive requires all buildings in the EU to be rated in energy performance classes, ranging from A (best) to G (worst). The A class is for zero-emission buildings and the G class is given to the very worst-performing buildings in the national building stock.
As the G class depends on the national characteristics of the building stock, there is no harmonisation of energy classes across EU countries. Similarly, the obligation to renovate residential buildings is based on the worst-performing buildings in the national building stock, rather than all individual buildings, allowing for some flexibility and adaptability to different national standards.
Public social housing is exempt when these energy upgrades would cost more than they save or would increase the rent beyond the savings produced on energy bills.
The directive requires EU countries to submit national building renovation plans, integrated into their national energy and climate plans, which include:
The directive requires EU countries to install solar installations progressively in public and non-residential buildings, depending on their size, and in all new residential buildings by 2030, if technically and economically feasible.
It stops subsidies for stand-alone fossil fuel boilers as of 2025, requires EU countries to set up technical assistance facilities, defines exceptions for agricultural and heritage buildings, and options for exceptions to be made for buildings of special architectural or historical merit, temporary buildings, churches and other places of worship.
2. The Renovation Wave Strategy
The Renovation Wave Strategy aims to renovate 35 million buildings by 2030 and to make sure that renovations lead to greater energy and resource efficiency.
The strategy also aims to protect all residents in the EU who are unable to adequately heat their homes, by ensuring that vulnerable consumers can afford essential heating and energy services.
3. Heat pumps
Heat pumps are devices providing hot water, heating and cooling for homes and businesses. They are three to five times more efficient than traditional gas boilers.
The REPowerEU plan, which aims to phase out all EU imports of Russian gas, proposes to improve the EU energy efficiency by doubling the rate at which heat pumps are installed in buildings and accelerating the roll-out of heat pumps for district heating and cooling networks.
C. Cogeneration of heat and power
Cogeneration is the simultaneous production of electricity and useful heat. The Energy Efficiency Directive aims to maximise the efficiency of plants by requiring EU countries to:
D. Energy efficiency of products
1. Affordable Energy Action Plan
As part of the Clean Industrial Deal, the Affordable Energy Action Plan aims to make energy use more efficient and reduce energy costs for industries and consumers. The plan includes the creation of a European energy efficiency market to guide businesses toward cost-effective solutions. It also provides for EU energy labelling and ecodesign regulations to be updated to promote more efficient, longer-lasting products. These measures could save up to EUR 162 billion on energy bills by 2030.
2. Ecodesign requirements and energy labelling
Certain EU products, such as household appliances, boilers, phones, computers or other electrical or electronic equipment, must comply with minimum requirements related to energy efficiency. These are called ecodesign requirements.
The Ecodesign Regulation, which is gradually replacing the Ecodesign Directive, and the Energy Labelling Regulation provide rules for energy efficient and sustainable products. The Ecodesign Regulation sets requirements for almost all categories of physical goods, including:
It introduces digital product passports, rules for the destruction of unsold consumer products, and green public procurement.
The Energy Labelling Regulation introduces the well-known EU label for products using an A-G energy scale, helping consumers make environmentally friendly choices when buying products.
Energy governance
Under the regulation on the governance of the energy union and climate action, EU countries must establish 10-year national energy and climate plans for the 2021-2030 period and submit progress reports every two years. The European Commission assesses these reports and can take measures at EU level to ensure their consistency with the overall EU targets.
Role of the European Parliament
The European Parliament has always acted as a primary driver of ambition in EU energy efficiency policy.
It has continuously called for higher, legally binding targets and stricter regulations that go beyond the European Commission’s proposals, while also protecting the interests of EU citizens and businesses by reducing energy costs.
In the recent negotiations on the Energy Efficiency Directive, the European Commission’s initial position was a 9% reduction target for final energy consumption by 2030, relative to projections made in 2020. The European Parliament proposed increasing the EU energy efficiency target to at least 14.5%. This intense advocacy resulted in a compromise that set the current binding target at 11.7%.
Parliament has also consistently fought to a shift from indicative targets to legally binding ones and has promoted energy-efficient solutions for heating and cooling and to achieve energy savings.
It successfully pushed for the ‘energy efficiency first’ principle to be enshrined in the EU rules as a binding legal requirement, ensuring that efficiency must be considered at every level of energy planning, policy and investment.
Parliament has always been in favour of renovating the worst-performing buildings in the EU building stock, as a way to make major energy savings. Currently, around 40% of all energy consumed in the EU is used in buildings, and 80% of this energy is used for heating, cooling and hot water.
During the negotiations on the Energy Performance of Buildings Directive, Parliament found a balance between creating a unified European standard for energy classes of buildings and respecting local differences in national building stocks and energy consumers. It promoted energy-efficient measures, such as solar energy, in the renovation of buildings, the phasing out of fossil fuels and the use of wood materials, green roofs and facades, while also advocating support measures to combat energy poverty.
After the recent energy crises, Parliament called on the Commission to support energy-intensive industries in the adoption of clean technologies and energy-efficient production methods, and it proposed urgent measures to address the consequences of high energy costs for industries and people in the EU.
This fact sheet is prepared by the European Parliament’s Policy Department on Transformation, Innovation and Health. For more information, please visit the website of the Committee on Industry, Research and Energy.
Valentina Richard-Romei / Matteo Ciucci